HCS-2

1. Secure the mounting plate to the wall using 4 screws.

2. Place the controller onto the mounting plate capture hooks.

3. Slide the controller from right to left until it “locks” into place.

4. To release the controller, press on the lock and slide the controller to the right.

5. Controller Power core, sensors, device stations and internet cable to each ports accordingly.

6.Scan the QR code below to view the online tutorial video.

GENERAL INFORMATION

WARRANTY

TroIMaster only uses high quality components Under normal. operating conditions, the mechanical and electronic components are covered by a three-year warranty from the original date of purchase. For service, return the HCS-2 Hydro-X Pro Environment Control System. System in the original packaging to your shop with the original sales receipt.

Components that are excluded from warranty are components that have failed due to abnormal usage.

In the case of defects of the HCS-2 Hydro-X Pro Environment Control System, the controller will either be replaced or repaired using new or reconditioned products or parts. If the Controller will be replaced this limited warranty shall apply to the replacement product for the remaining initial warranty period, i.e. (three) 3 years from the date of purchase of the original product.

RETURNS

All returns need to be done in the original packaging in order to avoid damages of the product during transport. Defective products need to be returned to factory or service shop for repair. Non-professionals DO NIOT open the cabinet to prevent electric shock or damage to the equipment.

RETOUR

Tous les retours doivent être effectués dans leur emballage d'origine afin d'éviter d'endommager le produit lors du transport. Les produits défectueux doivent être retournés à l'usine ou à l'atelier de réparation pour réparation. Les non-professionnels NE NIOT ouvrent le boîtier pour éviter les chocs électriques ou les dommages à l'équipement.

REGISTRATION

TroIMaster Agro Instruments Co., Ltd. will occasionally release updated firmware for the HCS-2 Hydro-X Pro Environment Control System.

By registering your HCS-2 Hydro-X Pro Environment Control System on our website www.trolmaster.com we can notify you when an update is available.

We will not sell, rent or share your personal information.

WARNING : DO NOT allow the HCS-2 Hydro-X Pro Environment Control System to be exposed to water or excessive heat. DO NOT open or attempt to repair or disassemble the controller, as there are no user-serviceable parts inside. Opening the controller will void the warranty.

If the surface of HCS-2 Hydro-X Pro Environment Control System is dirty, wipe it with a dry towel. The HCS-2 Hydro-X Pro Environment Control System operates under natural ventilation conditions.

SPECIFICATIONS

ENVIRONMENTAL AND DISPOSAL CONCERNS:
THIS PRODUCT CONTAINSA BATTERYAND OTHER COMPONENTS WHICHMUST BE DISPOSED OF PROPERLY

This symbol displayed on a product, its accessories, or its packaging indicates that this product may not be discarded as household waste. Dispose of the equipment through a recycling center that handles electronics and electrical appliances. By disposing of the equipment in the proper and lawful way you will be helping to prevent possible damage to the environment and risk to public health.