AQUA-X SERIES
Precision Irrigation Control from Small to Large Grow
One Ecosystem.
Precision Feeding. Root-Zone Mastery
“The Command Center for Your Root Zone”
Unify your grow with the Aqua‑X. Automate irrigation and fertigation from your smartphone with commercial‑grade precision in one modular, plug‑and‑play platform.
Nutrient Monitoring
Precision Monitoring
24/7 nutrient monitoring: Tracks pH, EC, and water temperature to help maintain stable nutrient conditions.
Smart Irrigation
Sensor-Driven Irrigation
“Feed on Demand”: Triggers watering based on real-time substrate moisture (VWC) for precise dry-backs and optimized crop steering.
Multiple Zones
High-Capacity Automation
Aqua-X Pro (NFS-2) manages pumps and valves across up to 600 outputs with centralized automation for large-scale operations.
Feeding
Precision Feed by Volume
Aqua-X Plus and Aqua-X Pro deliver measured nutrient solution volumes using digital flow meters for consistent, pressure-independent irrigation.
Precision Fertigation
Pro-Level Irrigation Control, Driven by Data
“Master your root zone in minutes with an interface designed for professional growers.”
Stop guessing with manual timers. Aqua-X offers a data-driven system that removes the technical barriers to high-performance irrigation management.
-
Feed on Demand: Automate irrigation based on real-time substrate moisture—triggering irrigation based on real-time substrate moisture thresholds.
-
Plug-and-Play (RJ12): Connect solenoids, pumps, and sensors instantly with standard cabling for a clean, fast setup.
-
Free TM+ Pro App: Full remote oversight and unlimited historical data logging with zero monthly subscription fees.
Scalable Modular Irrigation
Efficient Water Management, Scalable Expansion for Growing Facilities
“Optimize your irrigation today and scale your facility as your yield grows.”
Professional-grade fertigation automation is finally accessible. This modular system ensures you only equip what you need today while staying ready for future expansion.
-
Entry-Level Pricing: Get started with industrial-grade precision for a low initial investment.
-
Massive Capacity: One single master controller supports up to 600 separate irrigation zones to handle any expansion.
-
DIY Installation: Designed for simple self-setup using plug-and-play RJ12 connections to simplified modular installation.
Advanced Irrigation & Nutrient Support
Precision Control From Source To Root.
“Integrate advanced fertigation sensors into one centralized irrigation ecosystem.”
Aqua-X goes beyond simple watering timers. It supports an extensive range of specialized sensors to give you a detailed, real-time view of your crop’s hydration and nutrition.
-
Nutrients & Solution: Monitor pH, EC, and Temperature in your reservoirs and stock tanks to help maintain stable nutrient solution parameters.
-
Root Zone & Substrate Monitoring: Measure VWC, EC, and temperature to enable feed-on-demand irrigation, optimize dry-backs, and execute precise crop steering.
Professional Irrigation Control
Automated Feed on Demand
“Data-driven root-zone management for consistent crop steering.”
Stop guessing with blind timers. The WCS-9 acts as the “eyes” of your garden, provides real-time visibility into root-zone conditions to help identify conditions associated with salt stress or over-saturation.
-
Feed on Demand: Automate irrigation cycles based on real-time moisture levels to execute precise dry-backs and sophisticated crop steering.
-
Root Zone Monitoring: Monitor VWC, EC, and temperature via daisy-chained sensor nodes to calculate a representative averaged reading across multiple sensor nodes and reduce the impact of localized measurement anomalies.
-
Precision Feed by Volume: Integrate with digital flow meters to deliver exact nutrient amounts in liters or gallons, reducing reliance on duration-based calculations and helping improve consistency.
All-in-one grow control:
Automate, optimize, monitor, and scale with ease.
Improve Efficiency with Precision Control
Replace timers with data-driven automation reduce water and nutrient waste through data-driven irrigation.
Automated Irrigation Control
Automates irrigation schedules and sensor-triggered watering while providing remote alerts and monitoring.
Modular DIY Setup
Plug-and-play RJ12 design delivers professional-grade automation with easy setup and scalable expansion as you grow.
Grow in your POCKET!
All-in-one control and monitoring tool on smart phone.
Get the app now on the app store and google play
Medium Line
WCS-2 and WCS-3 sensors provide essential data for advanced irrigation. WCS-3 measures moisture (Volumetric Water Content), while WCS-2 adds temperature and electrical conductivity (EC). Connected to Aqua-X Pro/Plus systems via RJ12, they transmit real-time data to screens and mobile apps, enabling multi-zone monitoring. This data supports automated irrigation (“Feed on Demand”)—activating when moisture drops—and crop steering via customizable schedules. Mobile notifications alert users to readings outside set limits, ensuring responsive environment management.
Digital Flow Meters
Sensor Board
The AMP-2 Sensor Board links pH, EC, and temperature probes to the Aqua-X Irrigation System, displaying real-time data on controller’s screen. Users set min/max limits for 24/7 alerts if readings deviate. Probes connect to the sensor board via terminals, and the board connects to the controller. This enables monitoring and remote access to historical data via a smartphone app.
Nutrient Line
The AMP-3 Sensor Board is a digital bridge connecting pH, EC, and temperature probes to Aqua-X Pro (up to 50 sensors) and Aqua-X Plus (up to 5 sensors) irrigation controllers. It provides real-time pH, EC, and water temperature data on its LCD screen and the main controller, enabling comprehensive water parameter monitoring for various tanks or dosing systems through flexible RJ12 connections.
Nutrient Line
The WD-1 Water Detector serves as both a leak sensor and an irrigation confirmation sensor. It detects leaks and verifies water flow during irrigation, issuing an alert if no water is detected after a pump or valve is activated.
When used with Aqua-X Pro or Aqua-X Plus, the WD-1 also enables automatic reservoir refilling using two sensors to maintain liquid levels. Aqua-X Pro supports up to 50 WD-1 sensors, while Aqua-X Plus supports up to 20.
Nutrient Line
DFM-1/2/3 digital flow meters integrate with Aqua-X Pro/Plus systems to measure and display liquid flow rate, speed, and total volume. They can also enable “Feed By Volume” for precise, volume-based nutrient solution dispensing, managing irrigation by liquid volume instead of duration. Multiple meters can be supported for comprehensive multi-zone monitoring.
Auto-refill Water Detection
Water Detector
The Aqua-X Irrigation System integrates environmental sensors. The WD-1 water detector functions as a leak detection or water-verification device, sending an irrigation failure alert if water isn’t detected after activation. Up to 25 can connect. The WCS-2 water content sensor measures the grow media’s water content, temperature, and EC via a five-prong assembly, displaying readings and sending alerts. The WCS-3 water content sensor monitors moisture (volumetric water content) with a three-prong design, showing current readings and providing historical data/alerts via a smartphone app. The system supports up to 8 of each water content sensor type.
11O/ 240V Control Line
The Aqua-X Irrigation System manages 110V/240V devices using control modules with multiple outputs. Up to five modules can connect to the main controller, managing up to 30 outputs for devices like pumps and solenoids. Installation is plug-and-play via RJ12 cables. Each output has individual time scheduling. A program device module handles timed control for devices up to 10 amps. A master pump link feature activates a central pump with other low-voltage devices. Settings and monitoring are available on the main controller or a smartphone app.
24V Control Line
The Aqua-X Irrigation System uses control boards with six independent 24V outputs for solenoid valves. Up to five boards can connect to the main controller via RJ12 cables, providing 30 individually controlled low-voltage outputs. They also support a master pump link, activating a central pump when any irrigation zone is active.
Pump / Valve Line
OA6-110, OA6-24, and OAT-24 control boards manage pumps and solenoid valves for Aqua-X systems. The OA6-110 offers six 110V outputs, while the OA6-24 and OAT-24 provide six and twelve 24V outputs. All modules connect via RJ12 for easy daisy-chain installation. Aqua-X Pro supports up to 50 control modules, while Aqua-X Plus supports up to 10 modules per channel for flexible irrigation control.
Control Boards
Pump / Valve Line
The OM-8 is an 8-channel dry contact module for Aqua-X Pro irrigation systems. Powered by 100–240 VAC, it controls up to eight pumps, solenoids, or other devices through 12A dry contact relays. Connected via RJ12, it is managed directly by the Aqua-X Pro controller and supports organized multi-zone irrigation through Room Groups. Aqua-X Pro supports up to 50 control modules across pump and valve lines.
Dry Control Board
Pump / Valve Line
Aqua-X Pro and Plus irrigation systems use control modules for pumps and valves. The DSP-1/2 is a programmable timer for equipment up to 10 amps. The DSD-1 provides dry-contact closure for equipment up to 6 amps. The DSV-1 offers selectable 12V or 24V AC/DC low-voltage output for devices like solenoids. Both systems can connect many modules, expanding irrigation management across multiple zones.
Device Control Modules
The Right Tools
For Every Grow
| AQUA-X (NFS-1) | AQUA-X PLUS (NFS-3) | AQUA-X PRO (NFS-2) | |
|---|---|---|---|
|
BEST FOR
|
Entry Level / Hobbyist
|
Commercial / Multi-Zone
|
Professional / Enterprise
|
|
DISPLAY
|
Backlit 128×128 LCD
|
7” LCD Color Touchscreen
|
10.1” LED Touchscreen
|
|
CONTROL
|
Button Control
|
Touchscreen
|
Touchscreen
|
|
REMOTE
|
App
|
App
|
Web-based Tool & App
|
|
MULTI-ZONE
|
—
|
Up to 6 zones
|
Up to 50 zones
|
|
PACKAGE CONTENT
|
NFS-1, WD-1, Touch Spot
|
NFS-3, AMP-3, RJ12 Set
|
NFS-2, AMP-3, RJ12 Set
|
|
—
|
|
|
|
|
SENSOR CAPACITYSENSOR TYPE
|
|
|
|
|
SENSOR BOARD
|
Max 1 pc (AMP-2)
|
Max 5 pcs (AMP-3)
|
50 Max Combined
|
|
pH & EC SENSOR
|
Max 1 pc each
|
Max 5 pcs each
|
(Included in 50 Max)
|
|
WATER DETECTOR
|
Max 25 pcs
|
Max 20 pcs
|
(Included in 50 Max)
|
|
WATER CONTENT
|
Max 8 pcs
|
Max 20 pcs
|
Up to 50 pcs
|
|
FLOW METER
|
—
|
—
|
Up to 50 pcs
|
|
—
|
|
|
|
|
CONTROL MODULE CAPACITYMODULE TYPE
|
|
|
|
|
OUTPUT CHANNELS
|
Up to 5pcs in combination
|
Up to 10pcs per channel
|
Up to 50 control modules
|
|
INDIVIDUAL OUTPUTS
|
Up to 30 schedules
|
120 Pumps + 120 Valves
|
600 Pumps + 600 Valves
|
|
MASTER PUMP
|
Max. 1pc
|
Max. 120pcs
|
Max. 300pcs
|
|
OM-8 COMPATIBLE
|
—
|
—
|
✓ (Uses 8 addresses)
|
|
—
|
|
|
|
|
IRRIGATION FEATURESFEATURE
|
|
|
|
|
LEAK DETECTION
|
✓
|
✓
|
✓
|
|
RECYCLE TIMER
|
✓
|
✓
|
✓
|
|
CROP STEERING
|
—
|
✓
|
✓
|
|
AUTO-FILLING
|
—
|
✓
|
✓
|
|
FEED BY VOLUME
|
—
|
✓
|
✓
|
|
CALENDAR RECIPES
|
—
|
—
|
✓
|
|
DAILY SCHEDULES
|
12 per day
|
50 per day
|
50+ per day
|
Expert Support,
Looking for help?
Our engineers are ready to solve your most complex integration challenges. Connect with our team to troubleshoot and scale your facility.
What is the Aqua-X system?
The Aqua-X system is a professional-grade, fully customizable modular irrigation control system. It allows growers to automate irrigation schedules, control multiple pumps and solenoids, and constantly monitor critical water and grow medium parameters like pH, EC, temperature, and moisture levels.
Does the system monitor my reservoir’s pH and EC?
Yes. By connecting the AMP-2 or AMP-3 Sensor Board, you can link heavy-duty pH and EC/Temp probes directly to your controller. You can use drop-in probes for open stock water tanks (like the PPH-1 and PCT-1) or inline probes for existing PVC piping (like the PPH-2/3 and PCT-2/3). Minimum and maximum limits can be set to provide 24/7 notifications if your nutrient solution falls out of balance.
How does the system protect against leaks or watering failures?
The Aqua-X uses WD-1 Water Detectors to provide 24/7 peace of mind. A detector can be used as a traditional leak sensor on the floor to monitor for spills. Alternatively, it can be used as a "water-verification monitor" placed where runoff accumulates. If a scheduled watering event triggers but the WD-1 does not detect water within an adjustable delay time, the system sends an immediate "irrigation failure" alert to your phone to prevent crop loss.
How does the system help with Crop Steering?
The system pairs with TrolMaster's Water Content Sensors (WCS-9) to constantly measure moisture levels, temperature, and EC within your grow medium (the root zone). You can fully automate irrigation events based on the actual water content of your medium (Feed-by-Moisture), setting specific moisture percentage triggers and "Dry Back" parameters to precisely steer your crop's vegetative and generative growth phases.
Can the Aqua-X automatically refill my nutrient reservoirs?
Yes, utilizing the Auto-Fill feature (available on the Pro and Plus models). By installing two WD-1 or WD-2 water detectors in your tank to act as float switches—one at the bottom and one at the top—the controller will automatically activate a pump or solenoid when the liquid level drops below the bottom sensor, and stop filling once it reaches the top sensor.
What does the “Feed by Volume” function do?
Available on the Aqua-X Pro and Plus, the Feed by Volume feature offers an option to feed your plants by precise liquid volume rather than by duration. By installing a DFM series digital inline flow meter (DFM-1, DFM-2, or DFM-3), the controller will accurately measure and dispense the exact amount of nutrient solution you select for each irrigation cycle.
Can I monitor and control my grow room remotely?
Yes! You can achieve complete control of your grow room from anywhere using the free TrolMaster smartphone app. Connecting your controller to the internet provides real-time data, remote setting adjustments, and instant push notifications if any of your parameters fall out of your custom limits. Users of the Aqua-X Pro also have access to a free web-based software program for desktop and laptop monitoring.
What is the “Master Pump Link” feature?
The Master Pump Link eliminates the need to coordinate two separate timers for your main pump and your zone solenoids. When you link a main water pump to multiple 24V irrigation solenoids, the main pump will automatically turn on whenever any of those specific solenoids are activated by the schedule.
How difficult is it to install the Aqua-X system?
Installation is as simple as plug-and-play. All sensors and device stations connect to the main controller using standard RJ12 cables and Y-splitters. Modules can be easily "daisy-chained" together for flexible expansion, or you can use the SPH-1 8-port splitter hub to eliminate the need for Y-splitters altogether.
What is the difference between the Aqua-X, Aqua-X Plus, and Aqua-X Pro?
- Aqua-X (NFS-1): The standard controller features a backlit LCD display and can control up to 30 individual outputs (pumps and valves) across 5 control modules.
- Aqua-X Plus (NFS-3): Upgrades your experience with a 7" LCD touch-screen and expanded capacity, allowing control of up to 120 pumps and valves.
- Aqua-X Pro (NFS-2): The most advanced model features a 10.1" touchscreen, free web-based software access, and massive capacity. It can control over 300 pumps while monitoring up to 50 sensors.