FirmwareUpdate

Aqua-X Plus (NFS-3) Controller Firmware V48 Apr 21，2026 07:24:59

1) Support with Substrate Sensor Set (WCS-9) | 2) Enhanced "By Moisture" functionalities under pump/valve settings. Important Notice: Initiating this update will trigger a full factory reset of the controller, resulting in the permanent erasure of all user settings and historical data.

TM+ Pro App APK Installation File for Android Devices Apr 20，2026 06:14:30

Re-enable connections for the TrolMaster Grow Camera (TC-1)

Aqua-X Pro (NFS-2) Controller Firmware V54.43 Apr 20，2026 01:07:30

1) Support with Substrate Sensor Set (WCS-9) | 2) Enhanced "By Moisture" functionalities under pump/valve settings. Important Notice: Initiating this update will trigger a full factory reset of the controller, resulting in the permanent erasure of all user settings and historical data.

Aqua-X (NFS-1) Firmware Version 4.1 Apr 20，2026 00:55:45

1) Support with Substrate Sensor Set (WCS-9) | 2) Reduced WCS-1/2/3/9 Capacity to 1 Sensor | 3) Added "By Moisture" mode in pump/value settings. Important Notice: Initiating this update will trigger a full factory reset of the controller, resulting in the permanent erasure of all user settings and historical data.

Hydro-X Pro (HCS-2) Firmware Version 268.122 Apr 20，2026 00:18:43

1) Support with Substrate Sensor Set (WCS-9) | 2) Maximum CO2 setpoint value can be adjusted up to 6000

Hydro-X (HCS-1) Firmware Version 7.2 Apr 20，2026 00:08:33

Contains bug fixes and performance optimizations.

Tent-X (TCS-1) Firmware Version V6.0 Oct 12，2025 20:57:48

Support with AC Remote Station (ARS-2)

Hydro-X Plus (HCS-3) Firmware Version V40.54 Sep 2，2025 02:22:44

1) Support with AC Remote Station (ARS-2) | 2) Support Spectrum Group Control

Green-X (GCS-1) Firmware Version V2.7 Sep 2，2025 01:58:24

Contains bug fixes and performance optimisations.

Carbon-X Controller firmware (CDA-1) Firmware Version 2.8 Sep 2，2025 01:53:10

Contains bug fixes and performance optimisations.

Remote Control Station (ARS-1) Firmware Version 1.6.9A Mar 13，2025 16:01:52

ARS-1 V1.6.9A contains bug fixes and performance improvements. If the firmware blackouts the screen, please try version 1.6.9B

Remote Control Station (ARS-1) Firmware Version 1.6.9B Mar 13，2025 16:01:06

ARS-1 V1.6.9B contains bug fixes and performance improvements. If the firmware blackouts the screen, please try version 1.6.9A

Humidistat Station (HS-1) Firmware Version 1.5A Mar 13，2025 15:56:13

HS-1 V1.5A contains bug fixes and performance improvements. If the firmware blackouts the screen, please try the version 1.5B

Humidistat Station (HS-1) Firmware Version 1.5B Mar 13，2025 15:55:34

HS-1 V1.5B contains bug fixes and performance improvements. If the firmware blackouts the screen, please try the version 1.5A

Thermostat Station (TS-2) Firmware Version 2.8B Nov 26，2022 07:24:38

This new firmware changes the deadband control logic from the Max/Min setpoint base to the Target setpoint base. It optimizes the control logic on the deadband control especially in conjunction with the HCS-2 V250 (or later) firmware upgrade. If the firmware black out the screen, please try the Version 2.8A

Thermostat Station (TS-2) Firmware Version 2.8A Nov 26，2022 07:22:52

This new firmware changes the deadband control logic from the Max/Min setpoint base to the Target setpoint base. It optimizes the control logic on the deadband control especially in conjunction with the HCS-2 V250 (or later) firmware upgrade. If the firmware black out the screen, please try the Version 2.8B

Thermostat Station (TS-1) Firmware Version 2.8B Nov 26，2022 07:20:52

This new firmware changes the deadband control logic from the Max/Min setpoint base to the Target setpoint base. It optimizes the control logic on the deadband control especially in conjunction with the HCS-2 V250 (or later) firmware upgrade. If the firmware black out the screen, please try the Version 2.8A

Thermostat Station (TS-1) Firmware Version 2.8A Nov 26，2022 07:18:51

This new firmware changes the deadband control logic from the Max/Min setpoint base to the Target setpoint base. It optimizes the control logic on the deadband control especially in conjunction with the HCS-2 V250 (or later) firmware upgrade. If the firmware black out the screen, please try the Version 2.8B

Temperature / Humidity Station (TSH-1) Firmware Version 0.5A Aug 18，2022 07:27:03

Version V0.5A contains bug fixex and performance improvements with max speed setting added