Carbon-X CO2 System
CO2 Emergency Stop Station (DSE-1)

The DSE-1 CO2 Emergency Stop Station provides a simple method to shut off the CO2 supply when any fault or high CO2 level is detected. It is a 120V controlled outlet that supplies the power to CO2 solenoid valves in normal  operation . The Carbon-X will then automatically shut off DSE-1 power if any fault or high CO2 level is detected within any of the installed CO2 sensors. If the DSE-1 loses communication with the Carbon-X, the power supply will also be disabled.


LED status:
* Blinking green FAST: If the LED is blinking quickly, that means the module has not been addressed to the controller OR that module does not have a good connection to the controller. *Pressing the small button on the module will address/link the module when first installed.
* Blinking green SLOW: If you see a slowly blinking green LED, that means the module is addressed and connected to the controller, and the module is currently turned OFF.
* SOLID green: If you see the LED is on solid (no blinking) that means the modules are addressed, connected and currently turned ON.
* Blinking red: If you see the LED change to blinking red, that means the module has been overloaded. To reset the overload unplug the module from the power.

Features
Package Content
Specification
Tech Sheets

LED Power Indicator

RJ12 Cable Socket

Addressing

Plug & Play 

Back
Orders and Shipping:
Phone: 801-678-1117
Email: orders@trolmaster.com
113 North 700 West,Building 5C,Bay 5
Ogden UT 84404
Tech Support
Phone: 877-420-9876
Email: support@trolmaster.com
64 N Mission Dr
Pueblo West,CO 81007
© 2022 TrolMaster All Rights reserved